Heat Resistant Silicone Acrylic Top Coat up to 200°C

Properties and Intended Use

Arafam heat resistant silicone acrylic top coat up to 200°C has been especially designed to be used for the internal and external protection of steel surfaces. It will well provide the heat resisting up to 200˚C and good weather resistance and can be applied both on primer and steel surface. Ease of cleaning and its compatibility with organic and inorganic primers make it an adequate coating for general usage.

Physical Properties

Shade: White (other colors available on request)
Gloss: Gloss
Density (gr/cm³): 1.2 ± 0.05
Weight solid (%): 57 ± 2
Volume solid (%): 42 ± 2
Typical thickness: 30-50 microns (DFT)
Theoretical coverage (m²/lit): 14 @ 30 micron
Flash point: 25 °C
VOC: 505
Drying time (not exposing):

Application data

Application ambient temperature:
Minimum: 5°C (and 3°C higher than dew point)
Maximum: 30˚C (substrate temperature: 1-35°C)
Relative humidity: 30%-70%
Number of components: 1
Thinner: RAFT-8000
Thinner for cleaning of tools: RAFT-300

Application Methods

Airless spray:
Nozzle orifice: 0.018”-0.021” inch
Nozzle pressure: 120-150 bar
(Airless spray data are indicative and subject to adjustment)
Air spray:
Nozzle orifice: 0.060”-0.072”
Nozzle pressure: 3-5 bar
Brush/Roller: for touch-up and spot repair only