Gloss Polyamide Epoxy Top Coat

Properties and Intended Use

Arafam gloss polyamide epoxy top coat can be used for interior and exterior usages with good resistance against weathering and the spillage of solvents, lubricants and chemicals. The product cures to a tough and flexible coating and provides excellent adhesion to Epoxy primer and intermediate coats.

Physical Properties

Shade: White (other shades are available on request)
Gloss: gloss
sDensity (gr/cm³): 1.2 ± 0.1
Weight solid (%): 65 ± 2
Volume solid (%): 50 ± 2
Typical thickness: 35-50 microns (DFT)
Theoretical coverage (m²/lit): 10 @ 50 micron
Flash point: 14 °C
VOC: 428
Drying time (not exposing):

Application data

Application ambient temperature:
Minimum: 5°C (and 3°C higher than dew point)
Maximum: 40°C
Relative humidity: 70% max
Number of components: 2
Hardener: RAF-HE
(Winter grade is available on request)
Mixing ratio (by weight): 100: 20
Thinner: RAFT-6000
Thinner for cleaning of tools: RAFT-300
Pot life: 8 hrs (@ 23°C)
Max. recoating time: 5 days

Application Methods

Airless spray:
Nozzle orifice: 0.018”-0.021” inch
Nozzle pressure: 180-250 bar
(Airless spray and air-spray data are indicative and subject to adjustment)
Air spray:
Nozzle orifice: 0.060”-0.072” inch
Nozzle pressure: 3-5 bar
Brush and roller: suitable